Product SKUs |
MBD-X10DRH-I -O | X10DRH-I (Retail Pack) |
MBD-X10DRH-I -B | X10DRH-I (Bulk Pack) |
Physical Stats |
Form Factor | E-ATX |
Dimensions | 12" x 13" (30.5cm x 33.2cm) |
Processor/Cache |
CPU | Intel Xeon processor E5-2600v4/ v3 family (up to 145W TDP**) Dual Socket R3 (LGA 2011) |
Cores / Cache | Up to22 Cores / Up to55MB Cache |
System Bus | QPI up to 9.6 GT/s |
Note | BIOS version 2.0 or above is required |
System Memory |
Memory Capacity | 16x 288-pin DDR4 DIMM slots Up to 2TB ECC 3DS LRDIMM, 1TB ECC RDIMM |
Memory Type | 2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
DIMM Sizes | RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB LRDIMM: 64GB, 32GB 3DS LRDIMM: 128GB |
Memory Voltage | 1.2 V |
Error Detection | Corrects single-bit errors |
On-Board Devices |
Chipset | Intel C612 chipset |
AHCI SATA | SATA3 (6Gbps); RAID 0, 1, 5, 10 |
SCU SATA | SATA3 (6Gbps); RAID 0, 1, 5, 10 |
IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2400 BMC |
Network Controllers | Intel i350 Dual Port Gigabit Ethernet Virtual Machine Device Queues reduce I/O overhead Supports 10Base-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8211E PHY (dedicated IPMI) |
Video | ASPEED AST2400 BMC |
Input / Output |
SATA | 10x SATA3 (6Gbps) ports |
LAN | 2x RJ45 Gigabit Ethernet LAN ports 1x RJ45 Dedicated IPMI LAN port |
USB | 5x USB 3.0 ports (2 rear + 2 via header + 1 Type A) 4x USB 2.0 ports (2 rear + 2 via header) |
Video | 1x VGA Connector |
Serial Port / Header | 2x Fast UART 16550 serial 2x COM Ports (1 rear, 1 header) |
DOM | 2x SuperDOM (Disk on Module) ports |
TPM | 1x TPM Header |
Chassis (Optimized for X10DRH-I ) |
3U Chassis: | SC835TQ-R920B SC836BE1C-R1K03B SC836BE2C-R1K03B |
Mid/Mini Tower Chassis: | SC732i-865B SC732D4F-903B |
4U / Tower Chassis: | SC743TQ-1200B SC417BE1C-R1K28LPB SC417BE2C-R1K28LPB |
Expansion Slots |
PCI-Express | 1x PCI-E 3.0 x16 6x PCI-E 3.0 x8 |
System BIOS |
BIOS Type | 128Mb SPI Flash EEPROM with AMI BIOS |
BIOS Features | Plug and Play (PnP) PCI 2.3 ACPI 1.0 / 2.0 / 3.0 / 4.0 USB Keyboard support SMBIOS 2.7.1 UEFI 2.3.1 |
Management |
Software | Intel Node Manager 3.0 IPMI 2.0 SPM SUM SuperDoctor 5 NMI Watch Dog |
Power Configurations | ACPI / APM Power Management Power-on mode for AC power recovery |
PC Health Monitoring |
Voltage | Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages. 6 Phase-switching voltage regulator |
FAN | 8x 4-pin fan headers (up to 8 fans) 8x fans with tachometer monitoring Status monitor for speed control Pulse Width Modulated (PWM) fan connectors |
Temperature | Monitoring for CPU and chassis environment CPU thermal trip support Thermal Control for 8x Fan Connectors Thermal Monitor 2 (TM2) support PECI |
LED | CPU / System Overheat LED Suspend static indicator LED UID/Remote UID |
Other Features | Chassis intrusion detection Chassis intrusion header SDDC Support RoHS |
Operating Environment |
Operating Temperature Range | 10°C - 35°C (50°F - 95°F) |
Non-Operating Temperature Range | -40°C - 70°C (-40°F - 158°F) |
Operating Relative Humidity Range | 8% - 90% (non-condensing) |
Non-Operating Relative Humidity Range | 5% - 95% (non-condensing) |