Product SKUs |
AS-4042G-6RF | A+ Server 4042G-6RF (Black) |
Motherboard | Super H8QG6-F |
Processor/Chipset |
CPU | Quad 1944-pin Socket G34 Supports up to four16/12/8/4-Core ready AMD Opteron™ 6000 Series processors HT3.0 Link support |
Chipset | AMD SR5690/SR5670/SP5100 Chipset |
System Memory |
Memory Capacity | 32 DIMM sockets Supports up to 1TB Registered ECC or 256GB Unbuffered ECC/non-ECC DDR3 1600/1333/1066 SDRAM in 32 DIMMs Quad channel memory bus For Dual or Quad CPUs: Recommended that memory be populated equally in adjacent memory banks See Detailed Memory Support Matrix |
Memory Type | Registered ECC or unb. ECC / non-ECC DDR3 1600/1333/1066 MHz SDRAM 72-bit, 240-pin gold-plated DIMMs |
DIMM Sizes | 1GB, 2GB, 4GB, 8GB, 16GB, 32GB |
Memory Voltage | 1.35V or 1.5V |
Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) |
On-Board Devices |
SAS | LSI 2008 SAS2 RAID 0, 1, 10, 5 (option) (Optional) AOC-SAS2-RAID5-KEY: RAID 5 Support |
SATA | AMD SP5100 (RAID 0, 1, 10) |
IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM over LAN support Winbond WPCM450 BMC |
Network Controllers | Intel 82576 controller, Dual-Port Gigabit Ethernet 10/100/1000BASE-T support |
Super I/O | Winbond W83527 chip |
VGA | Matrox G200 16MB DDR2 graphics |
Input / Output |
SAS | 8x 6Gbps SAS/SATA ports |
SATA | 6x SATA2.0 (3Gb/s) Ports |
LAN | 2 RJ45 LAN ports 1 RJ45 Dedicated LAN supports IPMI |
USB | 7x USB 2.0 ports 2x Rear, 4x internal header, and 1x type A |
Keyboard / Mouse | PS/2 keyboard and mouse ports |
Serial Ports | 1x Fast UART 16550 serial port 1x serial port header |
VGA | 1 VGA port |
Chassis |
Form Factor | Tower / 4U Rackmountable |
Model | SC748TQ-R1400B |
Dimensions |
Height | 7.0" (178mm) |
Width | 17.8" (452mm) |
Depth | 28.4" (721mm) |
Gross Weight | 87 lbs (39.5 kg) |
Available Colors | Black |
Front Panel |
Buttons | Power On/Off button System Reset button |
LEDs | Power LED Hard drive activity LED 2x Network activity LEDs System Overheat LED Power Fail LED |
Ports | 2x USB Ports |
Drive Bays |
Hot-swap | 5x 3.5" Hot-swap SAS/SATA Drive Bays SAS or enterprise SATA HDD only recommended |
Peripheral Bay(s) | 2x 5.25" Peripheral Drive Bay 1x 5.25" Bay For Floppy Drive |
Expansion Slots |
PCI-Express | 2x PCI-e 2.0 x16 slots 1x PCI-e 2.0 x8 slot 1x UIO or 1x PCI-e 2.0 x8 slot |
SAS / SATA Backplane |
SAS / SATA Hard Drive Backplane with SES2 |
System Cooling |
Fans | 3x 8200 RPM Hot-Swappable Cooling Fans 3x 8200 RPM Hot-Swappable Rear Exhaust Fan |
Shrouds | 1x Air Shroud |
Power Supply |
Redundant 1400W high-efficiency power supply with PMBus |
AC Input | 1200W: 100 - 140V, 50 - 60Hz, 10.5 - 14.7 Amp 1400W: 180 - 240V, 50 - 60Hz, 7.2 - 9.5 Amp |
DC Output +5V standby | 6 Amp |
DC Output +12V | 100 Amp @ 100-140V 117 Amp @ 180-240V |
With Power Distributor | +5V: 30 Amp +3.3V: 25 Amp -12V: 0.6 Amp |
PC Health Monitoring |
CPU | Monitors CPU Core Voltages, +3.3V, +5V, +12V, 5V Standby, VBAT CPU 4-Phase-switching voltage reulator |
FAN | Total up to 9-fan status tachometer monitoring Up to nine 3-pin fan headers Status monitor for speed control Support 3-pin fans with fan-speed control |
Temperature | Monitoring for CPU and chassis environment CPU Thermal Trip Support PC Temperature Sensing Logic |
LED | CPU / System Overheat LED Suspend-State Indicator LED +5V Standby Alert LED |
Other Features | Chassis Intrusion Detection Chassis Intrusion Header |
System BIOS |
BIOS Type | 8Mb Flash EEPROM with AMI BIOS SST 49LF080A BIOS Chip |
BIOS Features | Plug and Play (PnP) DMI 2.3 PCI 2.2 ACPI 2.0 USB Keyboard Support SMBIOS 2.3 |
Operating Environment / Compliance |
RoHS
| RoHS Compliant |
Environmental Spec. | Operating Temperature: 10°C to 30°C (50°F to 86°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing) |