Маршрутизатор Cisco C812G+7-K9 в Ростове-на-Дону

Feature

Specification

Memory

Default and maximum DRAM

All C812 models 512 MB

Default and maximum flash memory

All C812 models: 512 MB

Interface Support

Console or auxiliary port

RJ-45: Single dual-purpose port, which provides direct connection to a console or external modem for management or backup access point

WAN interfaces

● Wireless WAN AP802 with 3G and 3.7G speeds

● 10/100/1000 Gigabit Ethernet port

● Outside ceiling and wall mounting options (brackets included)

WLAN Features

● Embedded 2x3 multiple-input multiple-output (MIMO) with two spatial streams

● Maximal ratio combining (MRC)

● Legacy beamforming

● 20- and 40-MHz channels

● PHY data rates up to 300 Mbps

● Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)

● 802.11 dynamic frequency selection (DFS)

● Cyclic shift diversity (CSD) support

Physical Characteristics

Physical dimensions
(H x W x D)

All Cisco 812G models: 2.01 x 8.95 x9.49 inches (51 x 227 x 241 mm)

Weight

All Cisco 812G models: 3.96 lbs (1.8 kg)

Mean time between failure (MTBF – Ground Benign)

SKUs

MTBF Hours

C812G+7-K9

340,000

C812G-CIFI+7-E-K9 and C812G-CIFI+7-N-K9

280,000

C812G-CIFI-V-A-K9 and C812G-CIFI-S-A-K9

210,000

Maximum platform power consumption

Cisco 8192G

11 watts

Cisco C812G CIFI

18 watts

Environmental operating range

All Cisco 812G models: -13 to 140 F ( -25 to 60 C)

IP 20 per IEC 60529

Operating altitude

Derate max 1.5 C per 1,000 ft above 5,000 ft

Maximum altitude: 10,000 ft

Standard safety certifications

● UL 60950-1, 2nd edition

● CAN/CSA C22.2 No. 60950-1, 2nd edition

● EN 60950-1, 2nd edition

● CB to IEC 60950-1, 2nd edition with all group differences and national deviations

● AS/NZS 60950-1, Edition 1 (Australia nad New Zealand)

EMC emissions

EN55022/CISPR22, CFR 47 Part 15, ICES003, VCCI-V-3, AS/NZS CISPR22, CNS13438, EN300-386, EN61000-3-2, EN61000-3-3, and EN61000-6-1

EMC immunity

EN55024/CISPR24, (EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-11), and EN300-386

Radio Immunity

EN301 489-1, EN 301 489-7, and EN301 489-24

Cellular radio

EN 301 908-1, EN 301 908-2, EN 301 511, 47 CFR Part 22, and 47 CFR Part 24

Humidity

Maximum 85% non-condensing RH

Power specifications

The default configuration includes an external AC adapter that supplies up to 20 W of power. The AC power connection is a two-pin IEC 320 C8 receptacle. A mating AC power cord is supplied. The AC adapter does not provide chassis grounding to the router. A 1.3 meter long output cable connects to the router.

AC Power Adapter

● Input Voltage: 85-264 VAC 100-240 VAC nominal

● Maximum Power Consumption: 25W

● Maximum Output Power Rating: 20 W (5VDC, 4 Amps)